diamond ice sculptures: Can diamonds be an ice sculptor’s best friend?

diamond ice sculpture for a prom by Ice Pro Ice Sculptures

here’s a single block, CNC cut diamond ice sculpture from Ice Pro. Looking closely at the photo, you might notice some vertical rectangular patterns that look like they’ve been cut into the back of the sculpture. Joe Rimer of Ice Pro assured me that this is an optical illusion created by the facets.

updated 7/13/23 with seo stuff and formatting, mostly while I was supposed to be doing something else

all about diamonds & diamond ice sculptures

Here is the second contribution from Joe and Lianne Rimer at Ice Pro. The article turned into a collaboration when we both happened to have diamond projects going on. Thanks Joe and Lianne for all the help!

Everyone has heard that diamonds are a girl’s best friend. But do diamonds have other friends? As an ice sculptor, if you’ve ever tried to carve a diamond, you might not have been on the friendliest of terms with your creation by the time you finished. Diamonds are hard! And not in the “hardest substance in the world way,” but in an “extremely difficult to properly execute” way. This article looks at hand sculpting a diamond and creating a diamond on a CNC machine.

Sysco diamond and logo ice sculpture

A multi-block, CNC and hand cut diamond ice sculpture from Ice Pro. This tiny photo doesn’t give you a proper idea of how large the diamond actually was: 40 inches tall and 30+ inches wide. Ice Pro used two of their Monster blocks, along with some additional ice to create the diamond and a forklift was required to get it into place! And I really don’t know why this is such a tiny photo for such a big ice sculpture!

the diamond 4 c's

The well known “four c’s” for rating diamonds are carat, color, clarity, and cut. In making an ice diamond a carver has our first “c,” carat, down, well…cold. Let’s say, from a 300 lb. block of ice, a carved diamond weighs, without the base or any other extraneous elements, about 75 lbs. If it were real, your diamond would be about a 170,000 carat stone!

Next, “color” isn’t much of a problem, as pure ice doesn’t have any.* If your diamond needs some, then all you need is the right colored lighting.

“Clarity” can be more troublesome, as not all ice is clear and free of fractures, but if you’re using a Clinebell or similar type of block, then you’re probably in good shape. (We’ll address another clarity issue, welding, below.)

The last “c,” of course, is “cut.” And for ice carvers, it’s almost all about the cut: how it’s cut and how well it’s cut. In creating an ice diamond the two most important aspects are the design (the how) and accurate symmetry (the how well).

* thicker ice will often have a blue color, because yellow and red light are absorbed as light travels through the ice, leaving proportionately more blue light visible. However, this really doesn’t come into play until you get to really big ice, like the big blocks in Alaska, ice bergs, or glacier ice!

anatomy of a diamond

According to AM-Diamonds, most diamonds are round brilliant cut diamonds, with 58 facets. Seen from the side, they look something like the drawing below.

part of a diamond diagram

The round part comes in when you look at the diamond from the table/crown vantage point. I guess this is the point of view most people see a diamond anyway, since they’re usually looking at a ring or a necklace.

top view of a round diamond line art

diamonds and ice

Now that we’ve seen what a typical diamond looks like, the difficulties in making a diamond ice sculpture become much more apparent. The first problem is a rather common one in ice sculpting: the block is too thin for a fully in the round subject. A standard block of ice is only half as thick as it is wide while the top view of the diamond clearly demonstrates the need for a much thicker block.

Certainly, you could cut a diamond that was only 10 inches in diameter in all directions, but generally, you want to make a diamond as large as you can so that the facet details last as long as possible.

There are at least a couple of solutions to this problem. First, you could weld two pieces of ice together to make an ice block with sufficient thickness. This is the preferred solution from a realistic point of view, but it creates a lot of technical challenges as well as a clarity issue. (Welded ice is not as clear as unwelded Clinebell-type ice, which is a problem for a diamond sculpture, where the clarity is more important than usual.)

A simpler solution, and the approach that we’ll take here, is to focus on the sculpture’s silhouette and detailing (rather than its proportional accuracy) to create a presentation that viewers immediate recognize as a brilliant faceted diamond.

hand sculpting a diamond ice sculpture

First, you need a very clean line drawing of your design. From this design, you’ll create a template to apply to the ice to guide your cuts. In creating this design, you do not want to overdo the number of facets in the diamond. In fact, you may want to go with a rather simple facet pattern for your diamond, such as the drawing below. Fewer facets means larger angles on the surface of the sculpture. As your diamond melts, larger facet angles will last longer. Shallower angles (resulting from more facets) will fade quickly.

realistic diamond line art

So far, we’ve looked at drawings that have essentially “ideal” diamond proportions. These proportions are designed to control the passage of light through the diamond, maximizing the amount of light that exits through the crown of the diamond and therefore in the direction of the typical viewer. Diamonds with ideal proportions are more “brilliant.” From an ice carver point of view, however, maximization of the diamond’s size may take precedence as the crown isn’t the usual viewpoint for an ice diamond, so we’ll stretch our design vertically (220%).

diamond designs

As we’ve discussed, for a standard one block diamond you want to create the effect of it being fully 3-dimensionally round when viewed from the front and back.  The side view will not be accurately to scale but if you create a great looking front and back viewed piece this probably won’t be much of an issue. The process is as follows:

  • Come up with a design for your diamond. (Use one of the designs below or create your own.)
  • Create two full-size templates based on your design. There are several methods to blow up your design to template size including going to a print shop, tracing from a projected image, or printing from a regular printer.Apply the templates to both sides of your block. When applying the templates to the block it is imperative that the templates are sealed to the block accurately (straight up and down, centered, and with the templates properly oriented to one another).
  • Trace the design into the block with a chainsaw, dremel, or small end mill, and remove left over templates.
  • Straight cut away the sculpture’s outer edges (silhouette) with a chainsaw, and then cut your facet angles on both sides.
  • If you are not happy with your facet corners, you can carefully cut shallow straight lines along all the facet edges with a v-chisel, v-bit, or chainsaw. (You’ll have to clean up the chainsaw lines, however.) Remember, straight lines and symmetry are vital for a diamond!
  • For finishing this piece, a small aluminum plate or an iron is generally more effective than other tools.
diamond ice sculpture designs
diamond ice sculpture design templates

This design’s base can be used for messages as in the sculpture at the very top of this entry or you can give it some sort of pattern or apply a rough texture to contrast with the diamond’s clean lines.

cutting a diamond ice sculpture on a CNC machine

In creating a highly symmetrical sculpture with clean, straight lines such as a diamond, a CNC machine offers numerous advantages. The process isn’t without pitfalls, however, so here’s a list of design suggestions based on experience.

  • Base your design on clear, symmetrical line art or photos.
  • To create the facets, we’ve found it more effective to spiral pocket different depths and not attempt to create angle cuts on the design.
  • Deep cut lines into your design along the “facet edges” to help the illusion of detailed facets. The cuts should remain for the length of time that the sculpture is on display, ensure little loss of detail during the event. Use a 1/4” or 3/16” bit; a 1/2” bit is too big while an 1/8” doesn’t usually cut deep enough and leaves lines that are easily clogged with snow.
  • Slightly angle cut your exterior facets by hand when you’re finished machining. On a good design this should be the only detailing necessary after it comes off of the CNC.


Using a CNC to cut a diamond ice sculpture is certainly worth the effort, but there are a number of technical issues in creating the design. Contact Joe Rimer at Ice Pro for more advice on the subject.

some additional notes

Besides the single block diamond ice sculpture, Ice Pro has more than once been called upon to create a very large diamond sculpture (see the Sysco diamond ice sculpture near the top of the page). These sculptures are created by welding together oversized CNC-ed components and then finishing the sculpture by hand. Heavy equipment is required to get these massive pieces into place.

Also, Lianne Rimer of Ice Pro was formerly a manager for Columbian Emeralds International in St. Thomas, U.S. Virgin Islands and her previous work experience with diamonds came in handy when she created the CNC designs used for the single block and the Monster block diamond ice sculptures.

Finally, here’s something both pretty recent and pretty relevant: a brilliant cut diamond beverage dispenser created for the 2014 Mardi Gras season (for the Queen of the Krewe of Hermes, actually). Who would have thought that an ice bowl could be a good starting point for a diamond? Worked out pretty awesomely in the end, especially considering that this was a somewhat rushed first attempt. And yes, there’s a bowl holding two gallons of tap-dispensable purple-colored adult beverages inside that ice diamond. Can’t wait for the next one!

diamond ice drink dispenser

postscript

Ok, only some of the following info about Ice Pro Ice Sculptures is accurate these days, but I’m leaving it as a look back to 2009. When I first posted this, I’d go to Florida all the time. (At update time, I go sometimes, but mostly just to the panhandle.) I’d either go to Ice Pro near Tampa and create sculptures with their machines or Ice Pro would create them and we’d meet halfway.

About Ice Pro
Ice Pro produces CNC ice work for the following quality ice sculptors:
Ice Carvers Choice, serving Memphis and the Mid South
ice dragon, serving Louisiana, Mississippi, Alabama, and the Florida panhandle
Arctic Ice, serving Greater Tampa Bay
All Star Ice, serving Orlando and the Florida East Coast
Brentons, serving Naples and Ft. Myers, FL
And we directly produce sculptures for the Florida West Coast from Sarasota/Bradenton south

If you are a quality sculptor interested in affordable high quality CNC product shipped to your location please visit our web site at www.iceprofl.com and/or contact us at Iceprofl@hotmail.com

We also have Clinebell ice blocks and ice bowls available, as well as our specialty oversized Monster ice blocks.

links & stuff

If you have any questions about all the diamond ice sculpture stuff in this post, email me or comment below. (It might not let you though; use IG otherwise.) If you would like to use this ice sculpture design or any other design on this site, please check the design usage guidelines. The design collection page lists designs on the site.

You might also find photos and info from this entry on the ice sculpting secrets Instagram account and you can comment there as well as below. Thanks!

share:

Facebook
Twitter
Pinterest
LinkedIn

recent posts